The 4- X 4- Deer Stand-- - Opportunity! for sale in Beaumont, TX
The 4- X 4- Deer Stand-- This Stand has a roof line that is sloped from 8- in the front to 7- at the back having a 3/12 pitch with a 12- overhang around the entire building. Roof Of this Stand is 5/8- plywood sheeting completely tarpapered with drip edge attached around the edge to prevent rot and having coated sheet iron screwed 12- on center with roofing screws and attached gaskets. Ceiling inside under the roof is -- plywood and is insulated. Walls are made of -- plywood. Floor is -- thick treated plywood with 5 floor joist which are attached to 4-4-X 4- treated posts raising this Stand 4- off the ground. Stand can be built to any height easily due to the 4 custom corner brackets which are 3/8- steel and bolted to the Stands outer floor joist and will easily accommodate any length of 4-X4- posts. All seams are held with exterior screws and are glued with Gorilla glue. Front and side glass windows are 36- wide X 24- tall, commercially made and open inward. Door has one commercially made 12- X 12- glass window. Door is held by 3 Stainless Steel hinges with hasp and sliding bolt. Each window has a carpeted shooting rail and floor is also carpeted. Stand comes with a complete 6 Volt lighting system which allows the floor to be illuminated during darkness so you can -get settled- after arriving for those early morning hunts. The stands I build are built with love and care based on 50 years of hunting and building experience. Painted with a primer coat and a finish coat of pick-up truck bed liner. Tom 409-201-xyz X. Still available at ListedBuy!
|
|
 |